phone number
How to Micro Grow Autoflower Marijuana

How to Micro Grow Autoflower Marijuana

Beginner growers can grow autoflower plants at home, even without the luxury of space. Since autoflower plants are genetically small, they are easier to cultivate indoors, even without any stress. When a rookie grower is afraid of growing marijuana, one can start with one or two potted autoflower plants. The first try could be a training ground to accumulate enough experience when growing more. Micro-growing autoflower plants are no sweat at all. It is easy and dependable and experience-worthy. Though it is easy, there are still variables to consider when learning how to micro grow autoflower marijuana.

The best thing about knowing how to micro grow autoflower marijuana is to be unafraid of the responsibility of handling full-blown marijuana operations. Instead, the grower can consider cultivating a couple of seeds and grow them in closets or other small spaces. Learning how to micro grow autoflower marijuana is the basic guide a rookie can follow to attain experiences needed for full-blown cultivation. This is similar to testing the waters and the rookie’s way of knowing which works well for one’s preference. When considering how to micro grow autoflower marijuana, there are things a rookie must understand and take notice of. These things will help take better care of the plants to make the first marijuana experience a successful one.

Micro growing Autoflower Marijuana

Micro growing autoflower marijuana is growing a small number of autoflower marijuana plants in limited or small places without compromising the quality and the possible yield result. It is considered indoor growing with a limited number of plants. Compared to the traditional growing system, micro growing focuses on the amount of growing space. Since space matters, the essentials such as light and air supply can be altered to cater to the demand of a small space. Thus, the challenge is to make the small space convenient and effective for growing the autoflower plants for excellent growth.

How to micro grow autoflower marijuana – Choosing the strain

There is no better way to start the micro-growing journey of the autoflowering plants than picking the right strain. The autoflower plants grow relatively smaller than the traditional ones, so it won’t be hard to choose the type of autoflower strain. What the beginner grower needs to consider is the growing height of the plant. Sativa-dominant plants are known to be tall and grow up exceedingly well. It might be too hard to cultivate these plants using micro-growing. On the other hand, Indica-dominant and autoflower strains are smaller and won’t stretch too widely. They are bushy, which means they can produce as much as they can. Since autoflower plants are also not like any other photoperiod plants that rely on sunlight, the best strain choice is the autoflowering marijuana plants.

How to micro grow autoflower marijuana – Lighting

Autoflowering plants may not rely on the light for it to bloom and grow, but that doesn’t mean the autoflowering plants don’t need light at all. Light is still the basic need of autoflowering plants. Light is very important for the plant’s growth, so choosing the best light will affect the overall result. There are many types of lights available in the market. Some are powerful and can last longer; however, these tend to heat too much. However, when micro-growing autoflower plants, there is no need to use too much light, for it may cause more damage than any good.

There are high-pressure sodium lights or HPS, which is a staple choice of marijuana growers because of its potent light; however, due to its power, it also heats quite easily and a lot. There are also CFL or compact fluorescent lamps that are affordable and don’t get too hot, but they are not as powerful as HPS lights. Lastly, there is the LED lighting, which is the best choice, but if you are on a tight budget, this could be a hole in the pocket.

How to micro grow autoflower marijuana – Air, Water, and Soil

There are also other essentials to consider when learning how to micro grow autoflower marijuana. One of these is the air. Autoflowering plants need air to grow well. As much as possible, the room should be airy with good airflow. However, with the micro growing, this may be difficult to maintain. To do the trick, the grower can use exhaust fans to maintain the cool air and take away the hot air. Two exhaust fans will do; one for getting the air in and another one for taking it out. If the space is too small, computer exhaust fans would be suitable. The size would depend on the amount of growing space.

Next is the soil. The soil is also very important since this is where the plant gets the needed nutrients, such as potassium, phosphorus, and nitrogen. To cater to this demand, there are different pre-mixed soils available in the market, which are already full of needed nutrients. When the grower chooses this, there is also no need to buy more organic nutrients since the soil has it all. However, if the grower decides to still give nutrients, make sure not to overfeed the plants or they will die. The soil should also be airy and not too compact for the air to pass through and let the roots breathe.

Lastly is the amount of water given. Autoflower plants need water but not too much water. The trick when watering autoflower plants is to check the topsoil. If the topsoil is yet damp from the last water, don’t add more. This will drown the roots and could cause roots rot or molds. When watering, provide the appropriate volume that will soak the soil and not make it dripping wet. Also, make sure the pots have holes so the excess water can seep out of the soil.

How to micro grow autoflower Marijuana – Growing Techniques

There are also different ways of how to maintain the growth of autoflowering plants. The next step on how to micro grow autoflower marijuana is the growing techniques and training, such as high-stress training, topping, low-stress training, and the screen of green.

The first technique is topping. Topping means cutting the top plants branch, so new branches will sprout on each side, making them grow sideways rather than upwards. Cutting the unnecessary branches will also help the plant maintain its small size. Another high-stress training is cutting off the main stem of the autoflower plants so that the growth will focus on the side branches rather than the main stem. This way, the plants tend to make more branches and grow at a shorter height.

However, if the high-stress training is far too scary, there is also low-stress training. The first one is the screen of green, which needs nets and screens to be put on right above the plant to control its desired length. The screen will prevent the branches from growing tall and making them bow down, thus, controlling their height. Another low-stress technique is tying the plant’s branches and bending them so the amount of light will be even with all the branches. Thus, the growth of the plant is even, and the plant will remain small.

Conclusion

Learning how to micro grow autoflower marijuana is the best first step for rookie marijuana growers to acquire experiences and knowledge on how to grow autoflower marijuana plants. The grower doesn’t need to start a full-blown set of plants. Starting small makes all the difference. Aside from giving less effort, the money spent is also smaller compared to growing more for the first time. Thus, every beginner grower should invest in learning how to micro grow autoflower marijuana. This is also the best time to experiment with growing techniques. There are a lot of techniques available. Once the grower uses them all, comparing which works best is easier. Also, this would let the grower know what problems might occur when cultivating autoflower marijuana plants, such as nutrient deficiency, overwatering, bugs, pests, and molds. Knowing about these will also help the grower get a better grip on how to cultivate marijuana better. Every expert grower starts small and inexperienced, and it is by slowly learning and gaining experiences do they become experts. Thus, knowing how to micro grow autoflower seeds is every growers’ initial step towards expertise.

Recent news:

3 Responses

    1. Hi Chris!

      Yes. If you have any further questions or concerns please call our Hotlines Toll Free: +1 (844) 276-7546. Thank you!

  1. Thank you so much for this simple teaching of AUTOFLOWERING. I am attempting Autoflowering as I type this to you. I was given 5 autoflower seeds called AK-1. Have you heard of these ? I cannot seek too find them anywhere. Anyways. your little straight forward teaching is very acceptable and I want to take a shot at autos, lol !!! Thank you. I love feminized because there is so much that can be done and I with too learn how too mave like,” 4 MOTHER PLANTS” so I can clone…Another day another story. peace , Love and Happy Growing

Leave a Reply

Your email address will not be published. Required fields are marked *

We will inform you when the product arrives in stock. Please leave your valid email address below.

Product Search

Popular Products

× How can I help you?